Special Electronic Products PMC Special Products offer solutions for converting pneumatic output to a 4-20 mA signal (P/I), measuring differential pressure (DII and D/P transmitter) as well as a digital meter panel system with LED meters coupled with PMC 4-20 mA electronic transmitter.   Air Content Control System PMC / FP Innovations AC1 through AC8 (Maximum 8 Channels) Top Mount Level Probe or Fixed Units Real time air content measurement Tank top or side mount sensors Up to 8 channel capability 2% total accuracy 4-20mA output to DCS Dip Stick Level Probe PMC-PT/EL-DS Ranges: 0 to 5" WC through 0 to 300 PSI 316L Stainless Steel tubing Standard lengths 18", 2', 4', 6' and 8'  4-20 mA, Analog or Smart HART Protocol LCD Display available Can be ordered with any PMC electronics terminal junction Low Pressure Differential Pressure Transmitter PMC-DP/EL Ranges: 0 to 10" WC Through 0 to 400" WC 4-20 mA, 3-wire output (Additional Ground) 316L Stainless Steel housing with 10' cable DII Converter for Differential Pressure Measurement PMC DII Ranges: 0.40 mA to 16.00 mA               PMC will calibrate to order                     DII will be furnished calibrated to 16.00 mA unless otherwise specified       May be combined with digital LED panel Electronic Pressure, Level and Vacuum Extended Diaphragm Transmitter PMC-PT/EL-CV/CX Ranges: 0 to 5" WC through 0 to 300 PSIG  0 to 20" WC negative through 0 to 30" Hg Vacuum +/- 30" Hg compound range 0 to 15 PSIA through 0 to 150 PSIA 4-20 mA, 2 wire output 316L S/S housing with 10' cable, NEMA-4X Standards EMI/RFI protected 3" Diameter Extension Standard lengths 2", 4" and 6" Non Standard lengths over 6" are available Remote Electronics Option Ideal for Wet and Harsh environments High vibration locations Hard to reach or hazardous locations Remote monitoring and range adjustment Available on most PMC Electronic Transmitters Pneumatic-to-Current Converter, P to I PMC P/I Ranges: 0-25"WC to 0-120 PSI (including 3 to 15 PSI) and vacuum ranges from 0-40"WC to 0-30"Hg Compact, rugged design 316 S/S housing with 10' cable Optional Terminal Junction Head in aluminum or stainless steel Digital Gauge & Stainless Steel Panel System Panels are made of 304 Stainless Steel Panel sizes: 2, 3, 4, 6, 8, 9 & 10 Included Electronics Transmitters, Factory wired meters, power supply and nameplates.

Last Updated: 9/7/2010 | Site Map © 2004 – 2010. Process Measurement & Controls, Inc. Formerly: Paper Machine Components. All Rights Reserved. Web produced by JCMinternet.com