PMC Electronic Pressure Transmitters accurately measure pressures, levels, and vacuum ranges in processes where clogging of the diaphragm face is a problem. The small diameter (1½") of the transmitter permits installation flush with the inside wall of pipes 3" in diameter or larger. This feature avoids the usual pocketing problems encountered with conventional flange-mounted and recessed-diaphragm transmitters. The capacitance sensor handles overloads of up to 10 times nominal range.
|
PMC-PT/EL-SAN-CV/P (Sanitary) As shown in photo
PMC-PT/EL-DR-CV/P (Double O-Ring Process Connection)
- Ranges:
0 to 5" WC through 0 to 300 PSIG
+/- 5" WC through +/- 400" WC Compound
0 to 3" WC negative through 0 to 30" Hg Vacuum (negative)
0 to 15 PSIA through 0 to 150 PSIA
- Small sensing area – 1½ inch
- Fits 3 inch diameter or larger pipes
- 4-20 mA, 2 wire output
- 316L S/S housing with 10' cable, NEMA-4X Standards
- EMI/RFI protected
- 3A Sanitary Approved
|
